BC635A Metal Shaping Machine
Features:
1.Metal Shaping Machine can turning angle of the table with horizontal and lift moving
mechanism; for the planning the inclined plane, thereby expanding the scope of use.
2.Planer feed system uses a cam mechanism to adjust the feed rate. It is very convenient to
change the feeding rate.
3.Shaping machine equipped with cutting system overload safety agencies.
Once occur careless operation, external influences or cutting overload,it will shift to self-skid, and non-destructive the machine.
4.Gap between the ram and the bed rail, the speed gear and the main sliding guide surface,
will be lubricated by the pump shot oil.
BC635A Metal Shaping Machine
|
Specifications
|
Units
|
B635
|
|
Maximum
shaping length
|
mm
|
350
|
|
Maximum
distance from ram bottom to table surface
|
mm
|
330
|
|
Maximum
moving distance of the working table(level)
|
mm
|
400
|
|
Maximum
moving distance of the working table (vertical)
|
mm
|
270
|
|
Since
the plane bed leading surface extending the maximum distance
|
mm
|
550
|
|
Maximum
ram travel
|
mm
|
170
|
|
Table
rotary angle (without vice)
|
|
±90°
|
|
Table
rotary angle (with vice)
|
|
±55°
|
|
Maximum
tool carrier travel
|
mm
|
110
|
|
Number
of ram reciprocating per minute
|
NO/min
|
32, 50,
80, 125,
|
|
Gear
move one tooth (vertical)
|
mm
|
0.18
|
|
Gear
move one tooth (level)
|
mm
|
0.21
|
|
Gear
move four tooth (vertical)
|
mm
|
0.73
|
|
Gear
move four tooth (level)
|
mm
|
0.84
|
|
Main
motor power
|
KW
r/min
|
1.5
1400
|
|
Overall
dimensions (L*W*H)
|
mm
|
1530*930*1370
|
|
N/G.W
|
kg
|
1000/1200
|
Standard accessories
Parallel vice 1PCS,
Square spanner 1PCS,
Crank handle 1PCS,
Double-ended spanner 3PCS
Hook spanner 5PCS
BC635A Metal Shaping Machine
Features:
1.Metal Shaping Machine can turning angle of the table with horizontal and lift moving
mechanism; for the planning the inclined plane, thereby expanding the scope of use.
2.Planer feed system uses a cam mechanism to adjust the feed rate. It is very convenient to
change the feeding rate.
3.Shaping machine equipped with cutting system overload safety agencies.
Once occur careless operation, external influences or cutting overload,it will shift to self-skid, and non-destructive the machine.
4.Gap between the ram and the bed rail, the speed gear and the main sliding guide surface,
will be lubricated by the pump shot oil.
