H 40/60R H40/70R Double column band saw

H 40/60 H40/70 Double column band saw

Machine characteristics
Its column design ensures rigidity during cutting, and employment of a completely different arm guiding technology than in pivot band saws provides cutting time reduction and accuracy increase.
Column saw machines are recommended especially to solid, tough to machine materials and thick shapes where high cutting accuracy is key.

In column band saws both the arm and the cutting band move up and down due to a hydraulic cylinder, whose chromium plated piston works as a guiding column.

Cutting band is inclined at an angle of 3o in relation to the workbench. Semi-automatic band saws, after being switched, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Machine''''''''s arm is made of uniform cast iron and, together with a 41 mm wide cutting band, it  enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm.

Highly efficient machine of solid construction. It can cut a broad range of materials, including stainless and tool steel, profiles and shapes.

Type: semi-automatic column
Control: control panel at the front of the machine
Maximum cutting diameter: ø 400, 400×600 mm
Arm raising and lowering: hydraulic
Band speed: from 20/46/61 m/min
Vice: hydraulic

Technical specification