Main Applications and Structural Features
M13 series cylindrical surface grinder is suitable for grinding outer surface of cylinder and taper.
it is suitable for single and small batch production.
The longitudinal movement of the workable is driven by hydraulic or by handwheel,the worktable can rotate to a certain degree so as to be suitable for grinding taper.
The wheelhead cross feed is driven by hydraulic,which realizes automatic periodical feed and rapid feed.it can also do rough and fine feed through handwheel.
The workhead spindle,wheelhead spindle,internal grinding spindle,coolent pump,hydrodynamic and hydrostatic ilo pump are driven by separate motors
|
item/model
|
unit
|
M1363
|
|
General capacity
|
Distance between centers
|
mm
|
3000、4000、5000
|
|
Center height
|
mm
|
335
|
|
Dia.ground (O.D.)
|
mm
|
30-630
|
|
Max.length ground (O.D.)
|
mm
|
3000、4000、5000
|
|
Max.weight of workpiece
|
kg
|
3000
|
|
workhead
|
Center taper
|
MT
|
Metric 80#
|
|
Spindle speed
|
r/min
|
50HZ:8-150
|
|
wheelhead
|
Wheel spindle speed
|
rpm
|
740
|
|
Wheelhead rapid travel
|
mm
|
100
|
|
max.travel
|
mm
|
437
|
|
Hand feed per.rev.
|
mm
|
rough：6 fine：0.5
|
|
Hand feed per gra.
|
mm
|
rough：0.02 fine：0.0025
|
|
Weel size ( O.D.* W *D)
|
mm
|
900*75*305
|
|
Peripheral velocity
|
m/s
|
|
|
table
|
Hand feed per rev.
|
mm
|
5
|
|
Max. Swiveling angle of table
|
clockwise
|
°
|
2°（3000）
1°（4000、5000）
|
|
Anti clockwise
|
°
|
３°（３００0 ）２°（４０００、５００0 ）
|
|
Longtidual speed range of table
|
m/min
|
0.1-4
|
|
tailtock
|
Center taper
|
MT
|
Metric 80#
|
|
Quil travel
|
mm
|
100
|
|
motor
|
Wheelhead motor power
|
kw
|
18.5
|
|
Workhead motor power
|
kw
|
5
|
|
machine
|
Gross weight
|
T
|
25（3000）、28（4000）、30（4000）
|
|
Packing dimension
|
cm
|
695x228x226/890x228x226/1100x228x210
|
Main Applications and Structural Features
M13 series cylindrical surface grinder is suitable for grinding outer surface of cylinder and taper.
it is suitable for single and small batch production.
The longitudinal movement of the workable is driven by hydraulic or by handwheel,the worktable can rotate to a certain degree so as to be suitable for grinding taper.
The wheelhead cross feed is driven by hydraulic,which realizes automatic periodical feed and rapid feed.it can also do rough and fine feed through handwheel.
The workhead spindle,wheelhead spindle,internal grinding spindle,coolent pump,hydrodynamic and hydrostatic ilo pump are driven by separate motors
