Characteristic:
Its retrofitting is based on the milling machine X6432.
1. V/H spindle are driven by one AC frequency inverter which is controller two spindle motors, with high and lower speed two steps.
2. Table feeding can realize manual and auto feeding, auto feeding is driven by one servo motor with YASAKAWA driver;3-axis operate by crossing button on
3. Table can swivel by +/-35 angle degrees.the panel, also can operate by separate electrical hand wheel.
|
Specifications
|
Unit
|
X6232 Vario
|
|
Table size (L×W)
|
mm
|
1320×320 mm
|
|
Table X/Y/Z travel
|
mm
|
800/290/400mm
|
|
T Slot(No./Width/distance)
|
mm
|
3/14/95 mm
|
|
spindle taper(V/H)
|
|
7:24 ISO40
|
|
Spindle speed
|
r.p.m
|
H: variable
75—1600 r.p.m.
|
|
r.p.m.
|
V: Variable
75—1600 r.p.m.
|
|
Distance horizontal spindle axis to table
surface
|
mm
|
0—400 mm
|
|
Distance from spindle nose to table surface
|
mm
|
170--590 mm
|
|
Distance from spindle axis to column
guideway
|
mm
|
240--740 mm
|
|
Ram travel
|
mm
|
500 mm
|
|
Table feeding rate
|
Mm/min
|
Longitudinal/transverse: 25~800 mm/min
vertical:8-267 mm/min
|
|
Motor power
|
Kw
|
Horizontal
|
4KW
|
|
Kw
|
Universal head
|
4KW
|
|
Kw
|
Table feeding servo motor
|
1.8KW,11.5N·M
|
|
Overall size
|
mm
|
2550×2161×2102 mm
|
|
Net weight
|
Kg
|
1650 kg
|
Characteristic:
Its retrofitting is based on the milling machine X6432.
1. V/H spindle are driven by one AC frequency inverter which is controller two spindle motors, with high and lower speed two steps.
2. Table feeding can realize manual and auto feeding, auto feeding is driven by one servo motor with YASAKAWA driver;3-axis operate by crossing button on
3. Table can swivel by +/-35 angle degrees.the panel, also can operate by separate electrical hand wheel.
