Features:
· Overall structure of the bed applies integrated design and manufacturing, casted with resin sand, with aging treatment, little deformation, high stability and rigidity;
· Bearing support of the linear roller is installed in hardening and precise guide rail, strong rigidity, low friction, high load and can move rapidly;
·Adopt double rectangular guide rail with 45°gradient, better guidance quality and rigidity, super-audio quenching, precise grinding, better accuracy and precision maintenance;
·Use larger carriage and integrated pressing plate, better rigidity of the carriage, more stable and powerful cutting;
·Adopt mechanical unit spindle with better rigidity, equipped with high precision domestic or imported bearing supports, and handled by dynamic balancing, the spindle has high speeds, balance running and high precision of turning;
· Adopt fully enclosed protective structure, compared with other products, it is much better in the aspects of waterproof, oil-proof, dust proof and safety performance;
·This lathe can be applied in precision industry in medium and small parts which need high requirements of size consistency;
·Equipped based on users requirements, the choice of accessories can meet the processing needs of most users.
|
Specifications
|
CK7563
|
CK7568
|
CK7580
|
CK75100
|
|
Max. swing over bed（mm）
|
630
|
680
|
800
|
1000
|
|
Max. swing over cross slide（mm）
|
400
|
430
|
520
|
720
|
|
Max. turning length（mm）
|
1000
|
|
Form
|
Mechanical spindle unit
|
|
Max speed of spindle
|
1500RPM
|
1500RPM
|
1500RPM
|
1000RPM
|
|
Terminal structure
|
A2-11
|
|
Hole diameter of spindle
|
105mm
|
105mm
|
105mm
|
132mm
|
|
Spindle hole fore-end taper
|
Metric system
80 1:20
|
Metric system
80 1:20
|
Metric system
80 1:20
|
Metric system
80 1:20
|
|
Main motor power
|
11KW
|
15KW
|
18.5KW
|
18.5KW
|
|
Max. travel of turret（mm）
|
340
|
360
|
420
|
530
|
|
Speed of quick-travel （mm/min）
|
8000
|
|
Setting accuracy （mm）
|
0.015/0.022
|
0.015/0.025
|
|
Resetting accuracy （mm）
|
0.008/0.016
|
0.007/0.020
|
0.007/0.020
|
0.007/0.020
|
|
Precision of work piece
|
IT6
|
|
Surface roughness
|
Ra1.6
|
|
Sleeve diameter of tailstock（mm）
|
120
|
150
|
|
Sleeve trip of tailstock（mm）
|
150
|
180
|
|
Cone hole taper tailstock’s sleeve（Morse）
|
Morse5#
|
Morse6#
|
|
Standard configuration
|
horizontal eight-station hydraulic knife rest
|
|
Length of section of knife handle（mm）
|
25 × 25
|
32 × 32
|
|
Standard configuration
|
GSK980
|
|
Alternative configuration
|
FANUC、Siemens
|
|
Length*width*height （mm）
|
3620 × 1960 × 2100
|
3800 × 2050 × 2180
|
|
Net weight （kg）
|
8500
|
8800
|
9800
|
10500
|
Features:
· Overall structure of the bed applies integrated design and manufacturing, casted with resin sand, with aging treatment, little deformation, high stability and rigidity;
· Bearing support of the linear roller is installed in hardening and precise guide rail, strong rigidity, low friction, high load and can move rapidly;
·Adopt double rectangular guide rail with 45°gradient, better guidance quality and rigidity, super-audio quenching, precise grinding, better accuracy and precision maintenance;
·Use larger carriage and integrated pressing plate, better rigidity of the carriage, more stable and powerful cutting;
·Adopt mechanical unit spindle with better rigidity, equipped with high precision domestic or imported bearing supports, and handled by dynamic balancing, the spindle has high speeds, balance running and high precision of turning;
· Adopt fully enclosed protective structure, compared with other products, it is much better in the aspects of waterproof, oil-proof, dust proof and safety performance;
·This lathe can be applied in precision industry in medium and small parts which need high requirements of size consistency;
·Equipped based on users requirements, the choice of accessories can meet the processing needs of most users.
