CK61100E CK61125E CK61140E CK61160E

Swing over bed:1000-1600mm
Bed width 755/970mm
Workpiece weight:5/6T

	+86 15905112265
	+86 15905112265
	+86 15358284628
	jack_zhu2

	+86 13851005559
	+86 13851005559
	+86 13851005559
	dfzhubing

Product Description

Product Video

Product Features

Technical data

Product Accessories

Enquiry

PRODUCT FEATURES:
1. Longitudinal and cross feeds are effected by servo motor drive through ball screws.
2. Either vertical or horizontal 3-station or 6-station tool post or gang tools can be selected. The post is located on precision contrite gears with a high repeated positioning accuracy.
3. Both chuck and tailstock are supplied with hydraulic or manual type.
4. The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
5. Variable spindle speed can be programmed as two rangs, that is high one and low one.

ITEMS	CK61100E	CK61125E	CK61140E	CK61160E
Max. swing over bed	Φ 1000 mm	Φ 1250 mm	Φ 1400 mm	Φ 1600 mm
Max. swing over carriage	Φ 620 mm	Φ 815 mm	Φ 990 mm	Φ 1190 mm
Width of bed	755 mm		970 mm
Maximum length of workpiece	1.5/2/3/4/5/6/8 m		1.5/2/3/4/5/6/8/10 m
Max. turning length	1.3 /1.8 /2.8 /3.8/4.8/5.8/7.8m		1.3 /1.8 /2.8 /3.8/4.8/5.8/7.8/9.8m
Max. weight be tween centers	5000Kg		6000Kg
Spindle nose	A2-15
Spindle bore	Φ 130 mm
Cone hole diameter and taper of spindle hole	Φ 140 1: 20
Steps of spindle speed(Manual)	2 (Variable Within Each Step)
Range of spindle spec	2.5~34 20~270 r/min
Rapid feed for Z axis	8m/min
Rapid feed for X axis	5 m/min
Max. travel of Axis Z	8m
Max. travel of Axis X	580 mm	685 mm	820 mm	900 mm
Max. Input	0.001 mm
Tool post stations	4
Tool cross section	40× 40mm		50× 50mm
External diameter of tailstock sleeve	Φ 160mm
Taper of bore of tailstock sleeve	80
Max. traverse of tailstock sleeve	300mm
Spindle motor power	22/26 KW(servo)
Power of cooling pump	370W
3m Overall dimensions(L× W× H)	6100× 2370× 2230 mm	6100× 2370× 2300 mm	6200× 2280× 2100 mm	6200× 2280× 2300 mm
Net weight(3m)	11500Kg	12300 Kg	12700 Kg	13500

ITEMS	CK61100E	CK61125E	CK61140E	CK61160E
Max. swing over bed	Φ 1000 mm	Φ 1250 mm	Φ 1400 mm	Φ 1600 mm
Max. swing over carriage	Φ 620 mm	Φ 815 mm	Φ 990 mm	Φ 1190 mm
Width of bed	755 mm		970 mm
Maximum length of workpiece	1.5/2/3/4/5/6/8 m		1.5/2/3/4/5/6/8/10 m
Max. turning length	1.3 /1.8 /2.8 /3.8/4.8/5.8/7.8m		1.3 /1.8 /2.8 /3.8/4.8/5.8/7.8/9.8m
Max. weight be tween centers	5000Kg		6000Kg
Spindle nose	A2-15
Spindle bore	Φ 130 mm
Cone hole diameter and taper of spindle hole	Φ 140 1: 20
Steps of spindle speed(Manual)	2 (Variable Within Each Step)
Range of spindle spec	2.5~34 20~270 r/min
Rapid feed for Z axis	8m/min
Rapid feed for X axis	5 m/min
Max. travel of Axis Z	8m
Max. travel of Axis X	580 mm	685 mm	820 mm	900 mm
Max. Input	0.001 mm
Tool post stations	4
Tool cross section	40× 40mm		50× 50mm
External diameter of tailstock sleeve	Φ 160mm
Taper of bore of tailstock sleeve	80
Max. traverse of tailstock sleeve	300mm
Spindle motor power	22/26 KW(servo)
Power of cooling pump	370W
3m Overall dimensions(L× W× H)	6100× 2370× 2230 mm	6100× 2370× 2300 mm	6200× 2280× 2100 mm	6200× 2280× 2300 mm
Net weight(3m)	11500Kg	12300 Kg	12700 Kg	13500

Hot Sell Products