1.The half and full enclosure, you can select
2.Hardened by induction, the machine bed and carriage has a long durability.
3.Electric turret and gang-tools turret can be both installed.
4.Manual lubrication or auto lubrication is up to you.
5.4-position electrical tool post as standard, 6-position is for optional selection,
6.Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing.
7.The bed way has been finely grinned after ultra-tone quenching.
8.It is applied to various line like automobile, valve, electric tools and hardware,etc. C
Main Technology Data
|
Unit
|
CK6132×500/750/1000mm
|
Swing over bed
|
mm
|
dia. 320
|
Swing over carriage
|
mm
|
dia. 150
|
Distance between centers
|
mm
|
500/750/1000
|
Spindle bore
|
mm
|
40mm
|
Spindle nose
|
|
A2-5
|
Rail width
|
mm
|
206
|
Taper of spindle bore
|
|
MT5
|
chuck
|
mm
|
152
|
Taper of spindle outside
|
|
D4
|
Range of speed (Variable)
|
rpm
|
150-2500 rpm
|
X axis travel
|
mm
|
180
|
Z axis travel
|
mm
|
500/750/1000mm
|
X/Z rapid speed
|
m/min.
|
4/7
|
X/Z screw
|
|
2004/4006
|
Station of toolpost
|
|
4 or 6
|
Max. section of tool
|
mm
|
20*20 or 16*16
|
Stroke of tailstock sleeve
|
mm
|
120
|
Dia./hole of tailstock sleeve
|
mm
|
45/MT3
|
Main motor power
|
kw
|
2.2/ 3.7
|
Coolant pump power
|
w
|
180
|
Overall dimenstion (L*W*H)
|
mm
|
1780/1920/2170*1220*1800
|
Packing size (L*W*H)
|
mm
|
1980/2120/2370*1420*2000
|
NW/GW
|
kg
|
850/950
|
Standard Equipment
Cooling system
Auto-lubricating system
Light system
GSK-980TDc
4-Position electrical tool post
Iron casting machine stand
Manual 3-jaw chuck
Optional Accessories:
GSK, Siemens or other controller
6-Position electrical tool post
Hydraulic chuck
1.The half and full enclosure, you can select
2.Hardened by induction, the machine bed and carriage has a long durability.
3.Electric turret and gang-tools turret can be both installed.
4.Manual lubrication or auto lubrication is up to you.
5.4-position electrical tool post as standard, 6-position is for optional selection,
6.Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing.
7.The bed way has been finely grinned after ultra-tone quenching.
8.It is applied to various line like automobile, valve, electric tools and hardware,etc. C
Standard Equipment
Cooling system
Auto-lubricating system
Light system
GSK-980TDc
4-Position electrical tool post
Iron casting machine stand
Manual 3-jaw chuck
Optional Accessories:
GSK, Siemens or other controller
6-Position electrical tool post
Hydraulic chuck