Features:
1. The integrated base and bed casting has
undergone a strict aging treatment, so high accuracy and rigidity is ensured.
2.High precision cartridge type spindle is
equipped with a linear cylinder and cullet chuck.,the spindle rotates smoothly
and high speed; turning roughness is up to Ra0.8～0.4.
3. Precision line guideways from Japan THK
improved total rigidity of lathe so that the lathe have high precision and runs
smoothly.
4.Precision pretensioned ball screw is
located between guidways from Japan, side torque is eliminated, Imported
bearings especially for screws are used and smooth transmission is ensured.
5. Feed screw in longitudinal and cross
direction are directly connected with AC servo motors through zero clearance
shaft couplings. High accuracy is ensured in transmission.
6.The unique dovetail comb type tool block
ensures easy setting, quick and precise tool change and maximum repeatability.
7.Automatic feeding machine is installed in
turret board, it’ s convenient to come ture the connected cooperation automatic through the CNC
control.
8. High preferment automatic intermittent
lubrication system can centralized lubrication for guideways and screw ensure
the lathe keep in a good lubricate station.
9.The control system of colored display
screen with USB connector, it’s convenient to transmission.
10.The external electric cabinet is easy to
serve: the separated rear mounted coolant tank and chip box ensure fluent chip
disposal and easy chip removal.
11.The machine is jointly driven
mechanically, electrically and pneumatically , famous brand pneumatic
,electrical components ,reliable performance.
12.Full enclosed guard with Stainless steel
protected ensure safe and friendly operation.
|
Item
|
Unit
|
CK20E
|
CK25E
|
CK30E
|
|
Capacity
|
Max.swing over
bed
|
mm
|
φ240
|
|
Max.swing over
slide
|
mm
|
φ120
|
|
Max.turning
dia.over tool block
|
mm
|
φ70
|
|
Max.bar dia.
|
mm
|
φ20
|
φ25
|
φ30
|
|
Max maching
length
|
mm
|
150
|
|
Spindle
|
Type of spindle
nose
|
|
/
|
A2-3
|
A2-4
|
|
Size of spindle
nose
|
mm
|
φ45
|
φ53.975
|
φ63.513
|
|
Spindle
thru-hole
|
mm
|
φ26
|
Φ32
|
φ36
|
|
Thru-hole of
spindle draw bar
|
mm
|
φ21
|
φ26
|
φ31
|
|
Max. speed of
spindle
|
rpm
|
6000
|
|
Work chucking
mode
|
|
Pneum. Collet
chuck
|
|
Feed
|
Travel X/Z
|
mm
|
200/180
|
250/180
|
|
Rapid traverse
X/Z
|
m/min
|
20/20
|
|
Tool post
|
Type of tool
post
|
|
Precision
Dovetail comb type tool
|
|
Tool section:
turning/boring
|
mm
|
12x12/φ25
|
|
Center height of
tool
|
mm
|
35
|
|
Motor
|
Power of spindle
motor
|
kW
|
2.2/3.7
|
3.7/5.5
|
|
Torque of
spindle motor
|
Nm
|
14/23.6
|
23.6/35
|
|
Power of motor
X/Z
|
kW
|
0.75/0.75
|
|
Torque of motor
X/Z
|
Nm
|
3.5/3.5
|
|
Power of coolant
pump motor
|
W
|
150
|
|
Others
|
NC controller
|
|
FANUC 0i mate-TD（standard equ.）
|
|
Power capacity
|
KVA
|
6
|
8
|
|
Type of
guideways
|
|
Precision linear
guideways
|
|
Net/Gross weight
of machine
|
kg
|
1000/1200
|
1000/1200
|
1020/1220
|
|
Dimension
of machine(L×W×H)
|
mm
|
1319x1495x1805
|
1319x1495x1805
|
|
|
|
|
|
|
|
Standard equipment
●FANUC 0i-TF
●High precision
spindle bearing from Japan(front 3;rear 2)
●Bearing
specially for screw imported from Japan
●THK
precision linear ways from Japan
●THK
precision pretentioned ball screw from Japan.
●Pneumatic
draw down collet chuck
●Linear
cylindar
●Servo
main motor
●Automatic
lubrication system
●Coolant
system
●pneumatic
system
●Standard
tool post
●Automatic
pull feeder
●Standard
collet chuck
●Machine tool adjustment
●Three color light of machine
●Enclosed protected
Optional equipment
●GSK/SIEMENS/SYNTEC
●4″hollow hydraulic 3-jaw chuck from Taiwan（CK20E/25E）
●4″solid hydraulic 3-jaw chuck from Taiwan（CK20E/25E）
●Hand chuck
●Domestic ball screw
●5″hollow rotating cylinder
●Pneumatic common control tail seat
●Spindle dish type brake
●Pneumatic/electric drilling/milling unit
●Front/rear air blowing
●Special tool seat
●Special clamping chuck
●Feeder support
●Automatic bar feeding machine
Features:
1. The integrated base and bed casting has
undergone a strict aging treatment, so high accuracy and rigidity is ensured.
2.High precision cartridge type spindle is
equipped with a linear cylinder and cullet chuck.,the spindle rotates smoothly
and high speed; turning roughness is up to Ra0.8～0.4.
3. Precision line guideways from Japan THK
improved total rigidity of lathe so that the lathe have high precision and runs
smoothly.
4.Precision pretensioned ball screw is
located between guidways from Japan, side torque is eliminated, Imported
bearings especially for screws are used and smooth transmission is ensured.
5. Feed screw in longitudinal and cross
direction are directly connected with AC servo motors through zero clearance
shaft couplings. High accuracy is ensured in transmission.
6.The unique dovetail comb type tool block
ensures easy setting, quick and precise tool change and maximum repeatability.
7.Automatic feeding machine is installed in
turret board, it’ s convenient to come ture the connected cooperation automatic through the CNC
control.
8. High preferment automatic intermittent
lubrication system can centralized lubrication for guideways and screw ensure
the lathe keep in a good lubricate station.
9.The control system of colored display
screen with USB connector, it’s convenient to transmission.
10.The external electric cabinet is easy to
serve: the separated rear mounted coolant tank and chip box ensure fluent chip
disposal and easy chip removal.
11.The machine is jointly driven
mechanically, electrically and pneumatically , famous brand pneumatic
,electrical components ,reliable performance.
12.Full enclosed guard with Stainless steel
protected ensure safe and friendly operation.
Standard equipment
●FANUC 0i-TF
●High precision
spindle bearing from Japan(front 3;rear 2)
●Bearing
specially for screw imported from Japan
●THK
precision linear ways from Japan
●THK
precision pretentioned ball screw from Japan.
●Pneumatic
draw down collet chuck
●Linear
cylindar
●Servo
main motor
●Automatic
lubrication system
●Coolant
system
●pneumatic
system
●Standard
tool post
●Automatic
pull feeder
●Standard
collet chuck
●Machine tool adjustment
●Three color light of machine
●Enclosed protected
Optional equipment
●GSK/SIEMENS/SYNTEC
●4″hollow hydraulic 3-jaw chuck from Taiwan（CK20E/25E）
●4″solid hydraulic 3-jaw chuck from Taiwan（CK20E/25E）
●Hand chuck
●Domestic ball screw
●5″hollow rotating cylinder
●Pneumatic common control tail seat
●Spindle dish type brake
●Pneumatic/electric drilling/milling unit
●Front/rear air blowing
●Special tool seat
●Special clamping chuck
●Feeder support
●Automatic bar feeding machine
