The main performance characteristics:
Big spindle bore and double chuck allows clamp and process big diameter pipes;
Integral machine bed adopts high strength iron to relize high rigidity and precision;
Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;
Equiped with taper guide bar device this enables the machine to process taper threads.
Application:
Q1313 horizontal pipe threading lathe machine is mainly used for turning the internal and external threads including metric and inch thread,as well as having all the common functions of normal engine lathe such as processing the inner bore and end face of shafts and disks,this machinery is equipped with taper guide bar device which enables this series to process taper thread.
This series lathe machine is widely used in industries including petroleum exploiting ,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
|
Model and specifications
|
Q1313-B
|
Q1319-B
|
Q1322
|
|
Guideway width
|
550mm
|
550mm
|
550mm
|
|
Max.swing over bed
|
630 mm
|
630 mm
|
630mm
|
|
Max.swing over
carriage
|
350mm
|
350mm
|
350mm
|
|
Max.workpiece
length
|
1500mm
|
1500mm
|
1500mm
|
|
Hole through
spindle
|
Φ130mm
|
Φ200mm
|
Φ225mm
|
|
Max.processing
Pipe diameter
|
126 mm
|
196 mm
|
219 mm
|
|
Number of spindle
speed changes
|
18 steps
|
12 steps
|
12 steps
|
|
Range of spindle
speed changes
|
12～640
r/min
|
24～300
r/min
|
24～300
r/min
|
|
Range and number
of whitworth thread
|
28～2/40种
|
28～2/40种
|
28～2/40种
|
|
mm）Range
and number of metric thread
|
1～14/24种
|
1～14/24种
|
1～14/24种
|
|
Power of main
motor
|
7.5kw
|
7.5kw
|
7.5kw
|
|
Max.processing
length of taper ruler
|
500 mm
|
500 mm
|
500mm
|
|
Rapid traverse
speed
|
4000mm/min
|
4000mm/min
|
4000mm/min
|
|
Processing
workpiece precision
|
IT7
|
IT7
|
IT7
|
|
Workpiece surface
roughness
|
Ra1.6
|
Ra1.6
|
Ra1.6
|
Standard accessories:
Tool post,Tailstock,Chuck,taper guide bar,Lighting lamp,Coolant pump,Rear support bracket,Pad iron etc.
Optional accessories:
Digital readout,Chuck,Faceplate,Chasing dial,Center rest,Signal light,Protective cover(lead-screw,chuck,tool post),and Grinding attachment etc.
The main performance characteristics:
Big spindle bore and double chuck allows clamp and process big diameter pipes;
Integral machine bed adopts high strength iron to relize high rigidity and precision;
Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;
Equiped with taper guide bar device this enables the machine to process taper threads.
Application:
Q1313 horizontal pipe threading lathe machine is mainly used for turning the internal and external threads including metric and inch thread,as well as having all the common functions of normal engine lathe such as processing the inner bore and end face of shafts and disks,this machinery is equipped with taper guide bar device which enables this series to process taper thread.
This series lathe machine is widely used in industries including petroleum exploiting ,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Standard accessories:
Tool post,Tailstock,Chuck,taper guide bar,Lighting lamp,Coolant pump,Rear support bracket,Pad iron etc.
Optional accessories:
Digital readout,Chuck,Faceplate,Chasing dial,Center rest,Signal light,Protective cover(lead-screw,chuck,tool post),and Grinding attachment etc.
