Extra heavy, wide machine bed with heavy
ribbing and one-piece mono-block construction
Induction-hardened and ground guide slots
ensure long-term accuracy and minimum wear
Massive headstock with high-precision main
spindle on a tapered roller bearing with 100 mm spindle bore for excellent
stability under heavy loads
very quiet operation at maximum spindle
speed
Manual 4-step auxiliary gearbox, premium
frequency drive technology combined with main spindle motor ratings up to 18.5
kW allow exact tuning of speed and torque for heavy-duty machining
central, practical controls for feeds and
thread leads
The auxiliary gearbox features a wide
spectrum of diametric, inch, module, and metric threads
support and top slide are designed for high
cutting forces
Joystick control for X and Z feeds is
mounted directly to support
Rapid feed for X and Z axis allow quick
support positioning and less down-time
Adjustable overload clutch in apron protects
the feed mechanics from damages and failures
|
Machine data
|
unit
|
CW61163
|
CW62163
|
|
Swing over bed
|
mm
|
1630
|
|
Swing in gap
|
mm
|
|
1800
|
|
Swing over cross slide
|
mm
|
1240
|
|
Distance between centers
|
mm
|
1500, 2000, 3000, 4500, 6000
|
|
Length in gap from face plate
|
mm
|
380
|
|
Spindle nose
|
|
C11 or D11
|
|
Spindle bore
|
mm
|
105, 130
|
|
Spindle speeds
|
rpm/steps
|
7-576/18
|
|
Cross slide travel
|
mm
|
815
|
|
Top rest travel
|
mm
|
225
|
|
Rapid traverse
|
mm/min
|
Z: 3200, X:1900
|
|
Quill diameter
|
mm
|
120
|
|
Quill travel
|
mm
|
260
|
|
Quill taper
|
|
MT6
|
|
Bed width
|
mm
|
610
|
|
Metric threads
|
mm/kinds
|
1-240/53
|
|
Inch threads
|
tpi/kinds
|
30-2/31
|
|
Moudule threads
|
mm/kinds
|
0.25-60/47
|
|
Diametral pitch threads
|
lpi/kinds
|
0.25-60/47
|
|
Longitudinal feeds
|
mm/r
|
0.07-16.72
|
|
Cross feeds
|
mm/r
|
0.04-9.6
|
|
Main motor power
|
kw
|
11
|
Extra heavy, wide machine bed with heavy
ribbing and one-piece mono-block construction
Induction-hardened and ground guide slots
ensure long-term accuracy and minimum wear
Massive headstock with high-precision main
spindle on a tapered roller bearing with 100 mm spindle bore for excellent
stability under heavy loads
very quiet operation at maximum spindle
speed
Manual 4-step auxiliary gearbox, premium
frequency drive technology combined with main spindle motor ratings up to 18.5
kW allow exact tuning of speed and torque for heavy-duty machining
central, practical controls for feeds and
thread leads
The auxiliary gearbox features a wide
spectrum of diametric, inch, module, and metric threads
support and top slide are designed for high
cutting forces
Joystick control for X and Z feeds is
mounted directly to support
Rapid feed for X and Z axis allow quick
support positioning and less down-time
Adjustable overload clutch in apron protects
the feed mechanics from damages and failures
