Extra heavy, wide machine bed with heavy
ribbing and one-piece mono-block construction
Induction-hardened and ground guide slots
ensure long-term accuracy and minimum wear
Massive headstock with high-precision main
spindle on a tapered roller bearing with 100 mm spindle bore for excellent
stability under heavy loads
very quiet operation at maximum spindle
speed
Manual 4-step auxiliary gearbox, premium
frequency drive technology combined with main spindle motor ratings up to 18.5
kW allow exact tuning of speed and torque for heavy-duty machining
central, practical controls for feeds and
thread leads
The auxiliary gearbox features a wide
spectrum of diametric, inch, module, and metric threads
support and top slide are designed for high
cutting forces
Joystick control for X and Z feeds is
mounted directly to support
Rapid feed for X and Z axis allow quick
support positioning and less down-time
Adjustable overload clutch in apron protects
the feed mechanics from damages and failures
|
MAIN SPECIFICATION
|
CW61143
|
CW62143
|
|
Swing over bed
|
1430mm
|
|
Swing in gap
|
/
|
1600mm
|
|
Swing over cross slide
|
1100mm
|
|
Distance between centers
|
1500, 2000, 3000, 4500, 6000mm
|
|
Length in gap from face plate
|
380mm
|
|
Spindle nose
|
C11 or D11
|
|
Spindle bore
|
105, 130mm
|
|
Spindle speeds
|
10-610/17rpm/steps
|
|
Cross slide travel
|
715mm
|
|
Top rest travel
|
225mm
|
|
Rapid traverse
|
Z: 3200, X:1900 mm/min
|
|
Quill diameter
|
120mm
|
|
Quill travel
|
260mm
|
|
Quill taper
|
MT60
|
|
Bed width
|
610mm
|
|
Metric threads
|
1-240/53 mm/kinds
|
|
Inch threads
|
30-2/31 tpi/kinds
|
|
Module threads
|
0.25-60/47 mm/kinds
|
|
Diametral pitch threads
|
60-1/2/47 tpi/kinds
|
|
Longitudinal feeds
|
0.07-16.72 mm/r
|
|
Cross feeds
|
0.04-9.6 mm/r
|
|
Main motor power
|
11 or 7.5 kw
|
|
Packing size
|
Length
|
38,404,340,517,066,700,000
|
|
Width
|
1700
|
|
Heigth
|
2080
|
Extra heavy, wide machine bed with heavy
ribbing and one-piece mono-block construction
Induction-hardened and ground guide slots
ensure long-term accuracy and minimum wear
Massive headstock with high-precision main
spindle on a tapered roller bearing with 100 mm spindle bore for excellent
stability under heavy loads
very quiet operation at maximum spindle
speed
Manual 4-step auxiliary gearbox, premium
frequency drive technology combined with main spindle motor ratings up to 18.5
kW allow exact tuning of speed and torque for heavy-duty machining
central, practical controls for feeds and
thread leads
The auxiliary gearbox features a wide
spectrum of diametric, inch, module, and metric threads
support and top slide are designed for high
cutting forces
Joystick control for X and Z feeds is
mounted directly to support
Rapid feed for X and Z axis allow quick
support positioning and less down-time
Adjustable overload clutch in apron protects
the feed mechanics from damages and failures
