Extra heavy, wide machine bed with heavy
ribbing and one-piece mono-block construction
Induction-hardened and ground guide slots
ensure long-term accuracy and minimum wear
Massive headstock with high-precision main
spindle on a tapered roller bearing with 100 mm spindle bore for excellent
stability under heavy loads
very quiet operation at maximum spindle
speed
Manual 4-step auxiliary gearbox, premium
frequency drive technology combined with main spindle motor ratings up to 18.5
kW allow exact tuning of speed and torque for heavy-duty machining
central, practical controls for feeds and
thread leads
The auxiliary gearbox features a wide
spectrum of diametric, inch, module, and metric threads
support and top slide are designed for high
cutting forces
Joystick control for X and Z feeds is
mounted directly to support
Rapid feed for X and Z axis allow quick
support positioning and less down-time
Adjustable overload clutch in apron protects
the feed mechanics from damages and failures
Specification
|
CW61103
|
CW62103
|
Swing over bed
|
mm(in)
|
1030mm
|
Swing over gap
|
mm(in)
|
|
1200mm
|
Swing over cross slide
|
mm(in)
|
700mm
|
Maximum turning length
|
mm(in)
|
1500mm/2000mm/3000mm/4500mm/6000mm
|
Length in gap from face plate
|
mm
|
380mm
|
Spindle noses No.
|
ISO
|
C11 or D11
|
Diameter of spindle hole
|
mm(in)
|
105mm,130mm
|
Range of spindle speeds
|
r/min
|
10-800rpm
|
Number of spindle speeds
|
|
18steps
|
travel of cross slide
|
mm(in)
|
615mm
|
Travel of transverse tool post
|
mm(in)
|
225mm
|
Rapid traverse
|
mm/min
|
Z:3200, X:1400
|
Diameter of tailstock quill
|
mm(in)
|
120mm
|
Travel of tailstock quill
|
mm(in)
|
270mm
|
Taper hole of tailstock quill
|
|
Morse6
|
Width of the bed
|
mm(in)
|
610mm
|
Metric threads number and range
|
mm
|
1-240/53(mm/kinds)
|
Inch threads number and range
|
T.P.I.
|
30-2/31(tpi/kinds)
|
Module threads number and range
|
mm
|
0.25-60/42(mm/kinds)
|
Diameter pitch threads number and range
|
D.P.
|
60-0.5/47(Dpi/kinds)
|
Longitudinal feeds
|
mm/r
|
0.07-16.72
|
Cross feeds
|
mm/r
|
0.04-9.6
|
Main motor power
|
kw
|
11kw
|
Extra heavy, wide machine bed with heavy
ribbing and one-piece mono-block construction
Induction-hardened and ground guide slots
ensure long-term accuracy and minimum wear
Massive headstock with high-precision main
spindle on a tapered roller bearing with 100 mm spindle bore for excellent
stability under heavy loads
very quiet operation at maximum spindle
speed
Manual 4-step auxiliary gearbox, premium
frequency drive technology combined with main spindle motor ratings up to 18.5
kW allow exact tuning of speed and torque for heavy-duty machining
central, practical controls for feeds and
thread leads
The auxiliary gearbox features a wide
spectrum of diametric, inch, module, and metric threads
support and top slide are designed for high
cutting forces
Joystick control for X and Z feeds is
mounted directly to support
Rapid feed for X and Z axis allow quick
support positioning and less down-time
Adjustable overload clutch in apron protects
the feed mechanics from damages and failures