BS-2 Full Universal Dividing Head Set, With 8″ Chuck
Main Features:
This unit gives you the ability to machine spiral gears/shapes
Head tilts 10 degrees down, and 90 degrees in the vertical direction, so it can be used for any angle needed
Quick indexing feature, for fast indexing without dividing plates, in 15 degree increments (24 positions) makes quick work of simple tasks such as machining hex shaped bolt heads
(4) Dividing Plates cover almost any division imaginable
Hardened Worm Gear for longer life
Worm gear disengages for direct indexing
Standard 40 to 1 ratio dividing head
Will index all divisions from 2 to 50, and most divisions from 52 to 380
8” 3 Jaw Chuck Included
Includes tailstock
BS-2 Full Universal Dividing Head Set, With 8″ Chuck
The
universal index center has been designed to carry out all types of gear
cutting.
Precision
dividing and spiral word with greater precision and efficiency than ever the
center
face can be tilted from a horizontal position of 90 degree down to -10 degree
from
vertical, and inclinations can be read off ascale graduated in degrees.The
center
is
built to highest engineering standards and is factory inspeted and tested to
assure
complete
satisfaction.The ratio of worm to gear is 1:40
TAIL-STOCK Unit:mm/in
|
Model
|
A1
|
B1
|
H1
|
h
|
a1
|
b1
|
g1
|
N.W.(kg)
|
Measurement
|
|
BS-2
|
183
|
87
|
156
|
133
|
175
|
122
|
16
|
Packed with the
Dividing
Head
|
|
7.2
|
3.42
|
6.14
|
5.24
|
6.89
|
4.8
|
0.63
|
HEAD-STOCK Unit:mm/in
|
Model
|
A
|
B
|
H
|
h
|
a
|
b
|
g
|
Work hole taper
|
N.W.
|
|
BS-2
|
370
|
280
|
236
|
133
|
212
|
134
|
16
|
MT4
|
73
|
|
14.57
|
11.02
|
9.29
|
5.24
|
8.35
|
5.28
|
0.63
|
B&SNO.10
|
STANDARD ACCESSORIES
Dividing
plate A,B,C
Number
of holes of dividing plate(worm gear reduction radio 1:40)
Unit:mm
|
Number of hole
|
PlateA
|
15
|
16
|
17
|
18
|
19
|
20
|
|
PlateB
|
21
|
23
|
27
|
29
|
31
|
33
|
|
Platec
|
37
|
39
|
41
|
43
|
47
|
49
|
BS-2 Full Universal Dividing Head Set, With 8″ Chuck
Main Features:
This unit gives you the ability to machine spiral gears/shapes
Head tilts 10 degrees down, and 90 degrees in the vertical direction, so it can be used for any angle needed
Quick indexing feature, for fast indexing without dividing plates, in 15 degree increments (24 positions) makes quick work of simple tasks such as machining hex shaped bolt heads
(4) Dividing Plates cover almost any division imaginable
Hardened Worm Gear for longer life
Worm gear disengages for direct indexing
Standard 40 to 1 ratio dividing head
Will index all divisions from 2 to 50, and most divisions from 52 to 380
8” 3 Jaw Chuck Included
Includes tailstock
BS-2 Full Universal Dividing Head Set, With 8″ Chuck
The
universal index center has been designed to carry out all types of gear
cutting.
Precision
dividing and spiral word with greater precision and efficiency than ever the
center
face can be tilted from a horizontal position of 90 degree down to -10 degree
from
vertical, and inclinations can be read off ascale graduated in degrees.The
center
is
built to highest engineering standards and is factory inspeted and tested to
assure
complete
satisfaction.The ratio of worm to gear is 1:40
TAIL-STOCK Unit:mm/in
|
Model
|
A1
|
B1
|
H1
|
h
|
a1
|
b1
|
g1
|
N.W.(kg)
|
Measurement
|
|
BS-2
|
183
|
87
|
156
|
133
|
175
|
122
|
16
|
Packed with the
Dividing
Head
|
|
7.2
|
3.42
|
6.14
|
5.24
|
6.89
|
4.8
|
0.63
|
HEAD-STOCK Unit:mm/in
|
Model
|
A
|
B
|
H
|
h
|
a
|
b
|
g
|
Work hole taper
|
N.W.
|
|
BS-2
|
370
|
280
|
236
|
133
|
212
|
134
|
16
|
MT4
|
73
|
|
14.57
|
11.02
|
9.29
|
5.24
|
8.35
|
5.28
|
0.63
|
B&SNO.10
|
STANDARD ACCESSORIES
Dividing
plate A,B,C
Number
of holes of dividing plate(worm gear reduction radio 1:40)
Unit:mm
|
Number of hole
|
PlateA
|
15
|
16
|
17
|
18
|
19
|
20
|
|
PlateB
|
21
|
23
|
27
|
29
|
31
|
33
|
|
Platec
|
37
|
39
|
41
|
43
|
47
|
49
|
