EPB-3D Electric Pipe bending machine

Main features：

L, the electric hydraulic pipe bender switchtightening, supporting wheels and curved mold and workpiece contact parts coated with grease.

2, according to the bending pipe size, select the corresponding bending die, installed at the top of the piston rod, the two supporting wheel corresponding to the size of the groove facing the bending mode, special attention should be put on the wing surface support wheels and the corresponding size hole, "maximum specification of the external orifice. And so on. To avoid the two supporting wheel position asymmetry, mold and mechanical damage.

3, put the workpiece after the upper wing plate cover, the bending molding to the workpiece by fast and slow pump pump, pressing the work to a required angle, hit the switch after bending, the working piston will automatically reset, open the upper wing plate, the workpiece is removed.mponents supplied in a wooden case, including electric pump, the bender , bending shoes and service pack.

EPB-3D Electric Pipe bending machine