EPB-2D Electric Pipe
bending machine
Main features：
L, the electric
hydraulic pipe bender switchtightening, supporting wheels and curved mold and
workpiece contact parts coated with grease.
2, according to
the bending pipe size, select the corresponding bending die, installed at the
top of the piston rod, the two supporting wheel corresponding to the size of
the groove facing the bending mode, special attention should be put on the wing
surface support wheels and the corresponding size hole, "maximum
specification of the external orifice. And so on. To avoid the two supporting
wheel position asymmetry, mold and mechanical damage.
3, put the
workpiece after the upper wing plate cover, the bending molding to the
workpiece by fast and slow pump pump, pressing the work to a required angle,
hit the switch after bending, the working piston will automatically reset, open
the upper wing plate, the workpiece is removed.mponents supplied in a wooden
case, including electric pump, the bender , bending shoes and service pack.
EPB-2D Electric Pipe bending machine
|
Model
|
Capacity
|
Max.stroke
|
Bending range
|
Bending formers
|
Wall thickness of pipe
|
G.W.
|
packing size
|
|
/
|
(T)
|
(mm)
|
(mm)
|
(in)
|
(mm)
|
(Kg)
|
(mm)
|
|
EPB-2D
|
13
|
250
|
Φ21.5-Φ60
|
1/2" 3/4" 1" 1¼" 1½" 2"
|
2.75-4.5
|
74
|
960×350×270
|
|
EPB-3D
|
20
|
290
|
Φ21.5-Φ88.5
|
1/2" 3/4" 1" 1¼" 1½" 2" 2½" 3"
|
2.75-5
|
126
|
1180×460×270
|
|
EPB-4D
|
23
|
370
|
Φ21.5-Φ108
|
1/2" 3/4" 1" 1¼" 1½" 2" 2½" 3" 4"
|
2.75-6
|
174
|
1180×460×320
|
EPB-2D Electric Pipe
bending machine
Main features：
L, the electric
hydraulic pipe bender switchtightening, supporting wheels and curved mold and
workpiece contact parts coated with grease.
2, according to
the bending pipe size, select the corresponding bending die, installed at the
top of the piston rod, the two supporting wheel corresponding to the size of
the groove facing the bending mode, special attention should be put on the wing
surface support wheels and the corresponding size hole, "maximum
specification of the external orifice. And so on. To avoid the two supporting
wheel position asymmetry, mold and mechanical damage.
3, put the
workpiece after the upper wing plate cover, the bending molding to the
workpiece by fast and slow pump pump, pressing the work to a required angle,
hit the switch after bending, the working piston will automatically reset, open
the upper wing plate, the workpiece is removed.mponents supplied in a wooden
case, including electric pump, the bender , bending shoes and service pack.
EPB-2D Electric Pipe bending machine
|
Model
|
Capacity
|
Max.stroke
|
Bending range
|
Bending formers
|
Wall thickness of pipe
|
G.W.
|
packing size
|
|
/
|
(T)
|
(mm)
|
(mm)
|
(in)
|
(mm)
|
(Kg)
|
(mm)
|
|
EPB-2D
|
13
|
250
|
Φ21.5-Φ60
|
1/2" 3/4" 1" 1¼" 1½" 2"
|
2.75-4.5
|
74
|
960×350×270
|
|
EPB-3D
|
20
|
290
|
Φ21.5-Φ88.5
|
1/2" 3/4" 1" 1¼" 1½" 2" 2½" 3"
|
2.75-5
|
126
|
1180×460×270
|
|
EPB-4D
|
23
|
370
|
Φ21.5-Φ108
|
1/2" 3/4" 1" 1¼" 1½" 2" 2½" 3" 4"
|
2.75-6
|
174
|
1180×460×320
|
