Z28-315 Rebar thread making machine
Product Application
1.Two spindle of the machine rotates synchronously in the same direction .Right spindle feed motion in the horizontal direction under the rolling drive.Two rolling wheels make the work as required and other thread shape by rolling.
2.This machine is mainly composed of an organism, rotating box, fixed spindle seat , a movable spindle seat, hydraulic system and electrical parts etc.
3.The fixed seat and the movable seat main function is installing the screw rolling wheel and adjusting the rolling wheel tooth.
4.This thread rolling head is a hydraulic power system, it is mainly to make the active spindle seat to feed and return .
5.The two spindle seat adjust center respectively.Angle of table axis can be adjusted in the plus or minus 3 degrees.Each shaft to feed the workpiece can be determined according to the parameters of workpiece and mechanical properties of materials.
Z28-315 Rebar thread making machine
|
Item
|
Parameter
|
|
Object part for rolling
|
Diameter
|
Φ8-Φ110mm
|
|
Thread range
|
0.5-8mm
|
|
Inner dia of roller wheels
|
Φ75mm
|
|
Width of both wheels
|
50-120mm
|
|
Dia of two roller wheels
|
Φ170-220
|
|
Maximum feedling power
|
300Ka
|
|
Both main axle rotation
speed(YPM)(exchange gear)
|
26、35、48、62rpm
|
|
Hydraulic auto-feeding time regulation
scope
|
0.1-99.9s
|
|
Hydraulic cease time regulation scope
|
0.1-99.9s
|
|
Mechanical transmission motor
|
11kw/1450r/min
|
|
Hydraulic transmission motor
|
5.5kw/1450r/min
|
|
Cooling electric pump
|
120w
|
|
Outer sizes(L*W*H)
|
2150*1800*1600mm
|
|
机床重量 Machine weight
|
4500kg
|
Z28-315 Rebar thread making machine
Product Application
1.Two spindle of the machine rotates synchronously in the same direction .Right spindle feed motion in the horizontal direction under the rolling drive.Two rolling wheels make the work as required and other thread shape by rolling.
2.This machine is mainly composed of an organism, rotating box, fixed spindle seat , a movable spindle seat, hydraulic system and electrical parts etc.
3.The fixed seat and the movable seat main function is installing the screw rolling wheel and adjusting the rolling wheel tooth.
4.This thread rolling head is a hydraulic power system, it is mainly to make the active spindle seat to feed and return .
5.The two spindle seat adjust center respectively.Angle of table axis can be adjusted in the plus or minus 3 degrees.Each shaft to feed the workpiece can be determined according to the parameters of workpiece and mechanical properties of materials.
