SW-38A Dual head pipe bending machine
Feature:
1. It can be divided into standard type (SW38) and rotary type (SW38A) according to structure of the base. The head of the rotary type bender (SW38A) can adjust the angle of elbow freely, but it shall consider the material feed problem.
2. As it is controlled by microcomputer, it is easy to operate and maintain it.
3. It can be operated full circularly or semi circularly and can be used for the volume production of symmetrical products at both sides.
4. The head of machine on the left and right can be adjusted rapidly and they are securely fastened. During bending, the center distance of two shafts will not deflect easily.
5. The bending angle can be adjusted with high precision and it meets the requirements of strict standard.
6. One or two tubes can be bent in one time according to its size, material and outer diameter.
Standard accessories
1. One pair of mould, one set of retaining device
2. One set of common tools
3. The head can turn for 90° inside and outside
SW-38A Dual head pipe bending machine
Specification:
|
SW38A dual head bending machine
|
|
Specification
|
SW-38A
|
|
The Largest Processing Diameter (iron pipe) mm
|
φ38×2
|
|
Max. Bending Angle
|
180°
|
|
Max. Bending Radius
|
200mm
|
|
Double Curved Center Range
|
170-1600mm
|
|
Bending Speed
|
50°/S
|
|
Motor Power
|
5.5kw
|
|
Hydraulic Pressure
|
12Mpa
|
|
Measurement Size Of Machine (L*W*H)
|
3200 * 1400 * 1700 mm
|
|
Weight Of Machine
|
1350 kg
|
|
Bending Mode
|
Rack drive
|
|
Warranty
|
1Year
|
SW-38A Dual head pipe bending machine
Feature:
1. It can be divided into standard type (SW38) and rotary type (SW38A) according to structure of the base. The head of the rotary type bender (SW38A) can adjust the angle of elbow freely, but it shall consider the material feed problem.
2. As it is controlled by microcomputer, it is easy to operate and maintain it.
3. It can be operated full circularly or semi circularly and can be used for the volume production of symmetrical products at both sides.
4. The head of machine on the left and right can be adjusted rapidly and they are securely fastened. During bending, the center distance of two shafts will not deflect easily.
5. The bending angle can be adjusted with high precision and it meets the requirements of strict standard.
6. One or two tubes can be bent in one time according to its size, material and outer diameter.
Standard accessories
1. One pair of mould, one set of retaining device
2. One set of common tools
3. The head can turn for 90° inside and outside
